Call (816) 537-6534

GMC

/GMC

We Service and Repair Most GMC Cars and Trucks

2008 GMC Acadia

2022-12-03T22:59:24+00:00

GMC Acadia

Mileage
182,102
Service Date
11/29/2022
Services Performed
  • Multipoint inspection ( inspect control arm )
  • WATER PUMP DRIVE BELT – Remove & Replace – [Includes: R&I Fender Liner.] – [Includes: Serpentine and V-Belt type Belt(s).]
  • mvi
  • AXLE SHAFT – Remove & Replace – One Side – [NOTE: For Independent Suspension Type Axles, this operation consists of removal and installation, dissassembly and reassembly of the Axle Shaft Assembly and replacement of the Axle Shaft.]
 
Laurie B. gave our service a 5 star review on 12/1/2022
2008 GMC Acadia 2022-12-03T22:59:24+00:00

2005 GMC Yukon XL

2021-06-26T22:01:01+00:00

GMC Yukon XL

Mileage
125,501
Service Date
6/22/2021
Services Performed
  • AIR CONDITIONING SYSTEM – Complete Charge – [Includes: Air Conditioning system recover, evacuate and recharge.]
 
Dave W. gave our service a 5 star review on 6/25/2021
2005 GMC Yukon XL 2021-06-26T22:01:01+00:00

2013 GMC Sierra 2500 HD

2020-03-20T22:01:29+00:00

GMC Sierra 2500 HD

Mileage
199,854
Service Date
3/17/2020
Services Performed
  • Alignment
  • BALL JOINT – Remove & Replace – 4WD Lower,Both – [DOES NOT include alignment.]
  • BALL JOINT – Remove & Replace – 4WD Upper,Both – [Serviced with Control Arm.] – [DOES NOT include alignment.]
  • CALIPER – Remove & Replace – Front,Both – [Includes: Perform ABS Automated Bleed procedure.] – [Includes: Bleed System and replace Pads (if necessary).]
  • CALIPER – Remove & Replace – Rear,Both – [Includes: Perform ABS Automated Bleed procedure.] – [Includes: Bleed System and replace Pads (if necessary).]
  • IDLER ARM – Remove & Replace – w/o Skid Plate – [DOES NOT include alignment.]
  • OUTPUT SHAFT SEAL – Remove & Replace – Front,Both – [Includes: R&I Drive Axle Housing.]
  • PITMAN ARM – Remove & Replace – Gas – [Includes: R&I Steering Gear Assembly. Includes: R&I Stabilizer Bar.] – [DOES NOT include alignment.]
  • TIE ROD &/OR END – Remove & Replace – Recirculating Ball Type Gears Inner,Both – [Includes: R&I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion
  • TIE ROD &/OR END – Remove & Replace – Recirculating Ball Type Gears Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie
 
Chad P. gave our service a 5 star review on 3/18/2020
2013 GMC Sierra 2500 HD 2020-03-20T22:01:29+00:00

2016 GMC Terrain

2020-03-11T22:00:29+00:00

GMC Terrain

Mileage
39,579
Service Date
2/26/2020
Services Performed
  • TRANSFER CASE ASSEMBLY – Remove & Replace – AWD,V6
 
Michael M. gave our service a 5 star review on 3/9/2020
2016 GMC Terrain 2020-03-11T22:00:29+00:00